The Simplified MFG EXeARC1 is an outstanding 18Gbps HDMI 2.0b extender. It's the first of its kind to bring eARC from the display back to the transmitter end. With this device, you can transmit uncompressed Dolby+/Atmos audio up to 50m from the display to the source/rack. It can work in either ARC or eARC mode. The EXeARC1 supports HDR8/10/10+ and Dolby Vision, meeting the entire HDMI 2.0b standard. It also supports Bidirectional Infrared control, RS232, along with the 18gbps HDMI 2.0b signal. Key Features: Fully support eARC and ARC to bring Dolby+ and Atmos audio back to your rack or AVR. Compliant with HDMI 2.0b (18Gbps), HDCP 2.2 and DVI. Offer video resolutions up to 4K2K@50/60Hz (YUV444). Pass through HDR8/10/10+ and Dolby Vision. Support HDMI High Bit Rate (HBR) audio pass through and CEC. Feature two - way POE, powering the other end device with only one supply. Transfer Bidirectional Infrared and RS232 control signals with the HDMI signal. Work over CAT6 cable. Support various video formats like 1080P @60Hz@48bit, 1080P @120Hz@24bit, etc. Come with a 3 - Year Warranty.

Using the Simplified MFG EXeARC1 is quite straightforward. First, connect the transmitter to your source device using an HDMI Type A cable. Then, connect the transmitter to the receiver through a Cat6 cable. Plug the receiver into your display device with another HDMI Type A cable. You can power either the transmitter or the receiver, and it will power the other end. When setting up, make sure to choose the right mode (ARC or eARC) according to your needs. Some things to keep in mind. Ensure that the cables are properly connected to avoid signal loss. Don't expose the device to extreme temperatures or high humidity. For maintenance, keep the device clean by using a dry cloth. If there are any issues, check the connections first. If the problem persists, refer to the troubleshooting section in the manual or contact our customer support. The device comes with a 3 - year warranty, so you can use it with confidence.