The AMX DXF-TX-MMD Duplex DXLink Multi-Format Multimode Fiber Transmitter is a powerful device. It can send both analog and digital audio and video signals, including HDMI with HDCP, up to 300 meters over multimode fiber. When used with the Enova DGX 8, 16, 32, or 64, it can transmit clear, uncompressed video at an industry - leading data rate of 10 Gbps. This transmitter also communicates control commands with the Enova DGX Digital Media Switcher via integrated NetLinx, offering a comprehensive control and distribution solution for all end - points. **Key Features** - HDCP - compliant fiber transmission: Transmit HDCP - compliant video like HDMI up to 300 meters. - Industry - leading data rate: With an optical transport rate of 10 Gbps. - Secure and isolated: Fiber provides extra security and electrical isolation, suitable for critical secure environments. - InstaGate Pro Technology: Effortlessly integrate HDCP into system designs and enjoy seamless matrix switching. - Native NetLinx Control: Control connected source devices through built - in IR and RS - 232 ports. - Field - serviceable fiber modules: Easily remove and replace SFP modules. - Multi - format ports: Support legacy analog signals and various digital signals. - Ethernet connectivity: Add Ethernet support for touch panels, WAPs, or IP audio/video streaming. **Technical Specifications** - Dimensions: 1” x 8 3/4” x 5 1/5” (2.54 x 22.12 cm x 13.08 cm). - DxLink Fiber: LC Duplex connector, OM3 50/125µm cable, 300m length. - USB: One USB Mini A/B Connector. - Front Connectors: One USB Mini - B and one non - scaling HDMI Type A Female. - Back Connectors: Multiple video and audio input connectors. - HDMI: Compatible with HDMI, HDCP, DVI, and supports various resolutions and audio formats. - HDCP & DDC/EDID: Supports AMX HDCP InstaGate Pro Technology and DDC/EDID. - Analog Video: Compatible with multiple formats and resolutions. - Audio: Supports various analog and digital audio formats. - FG Numbers: FG1010 - 362

Using the AMX DXF-TX-MMD transmitter is straightforward. First, connect your audio and video sources to the appropriate input ports on the back of the device. For example, you can plug in an HDMI cable from your media player to the HDMI input. If you have legacy analog sources, use the corresponding ports like the HD - 15 for RGBHV or the 3.5mm mini - stereo jack for analog stereo audio. Then, connect the multimode fiber cable to the LC duplex connector. This will allow the transmitter to send the signals up to 300 meters. When using it with the Enova DGX series, make sure to establish the connection as per the instructions. You can use the built - in IR and RS - 232 ports to control connected source devices. The Ethernet connectivity feature lets you add extra functionality, like connecting a touch panel or a WAP. Here are some important things to note. Ensure that the fiber cable you use is OM3 50/125µm and conforms to the required standards. When handling the SFP modules, be gentle as they are delicate. Also, if you are using HDCP - protected content, the transmitter's InstaGate Pro Technology will take care of it, but make sure your system is compatible. For maintenance, keep the device clean and free from dust. If you need to replace the SFP modules in the field, follow the proper procedures. You can easily remove and replace them, but ensure that you power off the device first to avoid any damage. Regularly check the connections to make sure they are secure and that the device is functioning properly.