The BZBGEAR BG-UDAIC-E14 is a top - notch HDMI splitter and distribution amplifier. It allows you to send one HDMI input to up to four outputs, and extend signals up to 70 meters (230 feet) using CAT 6/6A/7 network cables. This means you can place your video and audio source far from displays and speakers, without worrying about the issues of wireless connections like latency and unreliability. With support for resolutions up to 4K@60Hz, it offers crystal - clear images. The zero - latency transmission gives it a big edge over wireless setups, and the wired connection ensures higher and more consistent image quality. The receivers can output digital audio either from the display (ARC) or the source device via the S/PDIF port. There's also an HDMI loop - out for local displays. It comes with bi - directional IR passthrough through an IR blaster and receivers, letting you control equipment from afar, and EDID passthrough or manual configuration is available. RS - 232 command control is supported too. Other great features include surge, lightning, and ESD protection, and it's compliant with HDMI 2.0 and HDCP 2.2 for copyright protection. It can handle various audio formats like LPCM, DTS - HD, DTS - Audio, and Dolby Digital 5.1. With a black aluminum alloy and crystal panel design, it has a sleek look. The transmitter weighs 1.4 lbs (640g) and the receiver weighs 0.46 lbs (210g).

Using the BZBGEAR BG-UDAIC-E14 is easy. First, connect your HDMI source to the input of the transmitter. Then, use CAT 6/6A/7 network cables to connect the transmitter to up to four receivers. You can connect your displays to the receivers' HDMI outputs. For local displays, you can use the HDMI loop - out on the transmitter. To control your equipment, use the bi - directional IR passthrough. You can use an IR blaster and receivers to send commands even from a distance. If you need to set the EDID, you can either let it pass through automatically or use the EDID dip switches to set it manually. When it comes to power, the transmitter needs DC 12V/2A and the receiver needs DC 5V/2A. As for maintenance, keep it in a dry place with a temperature between - 4°F and 140°F (- 20°C and 60°C) and humidity between 0% and 90% without condensation. Avoid exposing it to lightning, surges, and electrostatic discharge as it has built - in protection but extreme conditions can still cause damage. Clean it with a soft, dry cloth.