The PureLink VIP-EXT-100-2 is an outstanding Full HD 1080P HDMI over IP Extension System. It offers Full HD video, audio, RS-232, and IR signal extension, working point to point with or without a network. The transmitter can connect to a receiver up to 120 meters away directly. Through a network switch, the extension distance can reach up to 240 meters. When used on a network, it can easily convert to distribution, switching, or matrix routing. Key features include locally or PoE 802.3af powered enclosures, 1080P60 Full HD extension, long - distance signal reach, video and stereo audio extension, RS232 and Infrared support, and the ability to convert to other systems with additional units. It uses the H.264 codec with a data rate of <= 15mbps and 390mS latency. Technical specs involve HDMI with embedded audio, Cat 5 UTP or better cabling, specific input and output signal types, support for up to 1080p resolution, HDCP 1.3 compliance, various audio formats, and details about power consumption, PoE, enclosure dimensions, weight, and a 3 - year limited warranty.

Using the PureLink VIP-EXT-100-2 is quite straightforward. First, connect the transmitter to your source device like a computer or media player. Then, connect the receiver to your display device. If you want to extend the distance, you can use a network switch. You can power the transmitter and receiver either locally or via PoE 802.3af. When using the system, make sure your network is stable if you're relying on network - based extension. Also, ensure that your devices support the input and output signal types mentioned in the technical specifications. For maintenance, keep the enclosures clean and avoid exposing them to extreme temperatures or humidity. If you need to convert the extension system to a distribution, switching, or matrix system, simply add additional Tx/Rx units as required. Remember, this product comes with a 3 - year limited warranty, so if you encounter any major issues, you can reach out for support.